Products

▼ Push-on-Pull design is allowed for proper ASTM E-4 calibration even over 450 MT (1 million pounds), enhanced load cell protection, and quicker ram return speeds.  The load cell is used in compression type and is placed between the transfer head and the cylinder.  Tie-rods then connect the transfer head to the cross head.  This design is easier to put the master compression load cell for calibration.

Two-Cylinder Push type test benches are Wirop's largest machines. They use two load cells in compression type, located between the crosshead and the end of each cylinder.

Two-Cylinder push type features a wide tubular frame for easy placement of large test specimens with heavy equipment. The Two-Cylinder push type can be placed above ground, or in an engineered concrete pit to accommodate customer needs. A tensioned trolley can also be added at the customer's request for testing high elongation products.

▼ The moveable trolley grip allows the grip to be pinned into the frame at any position.

▼ End Bed Design and Break Test Grips are also available upon request.

▼ Includes individual hydraulic power unit for operating hydraulic rams.

▼ Lightweight support plates for easy installation.

▼ Wire Rope Grip capacity : 60% of the minimum breaking load of EIPS wire rope for the size liner installed in the grip.

▼ Specially designed to test up to grade 100 chain in sizes ranging.

▼ Available for various test jobs and breaking test.

▼ Allows flexible accommodation on different chain sizes.

▼ Larger sizes of chain grips and adapters are available upon request.

▼ Specially designed to fit wire rope up to 1-1/2 inches.

▼ Allows a much shorter package, quicker loading and unloading.

▼ Specially designed for pre-stretch double grip applications.

▼ Quick and Easy installation by pin the grip into the crosshead for testing or pre-stretch long lengths of wire rope.

▼ Also available for 2-Cylinder Push test beds.

The Wireless Load Link transmits the load to computer or handset via radio channel at ISM band. This channel is a license free channel.

Aero-space grade aluminum tension link provides anti-rust capability and high level of robust design for rugged environment.
The wireless communication distance ranges from 150m to 250m or even longer using IEEE 802.15.4 networking definition. The standby battery life of 700 hours.

The loadlink achieve high accuracy for your load measurement.

The Wireless Load Shackle is made of industry leading Crosby or Green Pin shackle bow coupled with high strength stainless steel load cell pin. It transmits the data via license free 2.4GHz channel providing safe, high integrity, and error free data transferring. The load data can be read from computer with a USB receiver or handheld device.

Wirop has developed two types of reading devices: a mobile handset and a USB reader. The mobile handset reads load data, records peak and average values, and displays the current load. It can simultaneously monitor up to four Wirop load cells. The USB reader transmits load data to Windows-based computers and works with software packages developed by Wirop’s IT team, offering various functionalities for customers.

(For wooden and steel reels use only)

• Easy loading and unloading
• User friendly operation control
• Motorized opening /closing of axles with mechanical torque limiters ( by hydraulic cylinders)
• Motorized lifting and lowering of axles to fit appropriate reels ( by hydraulic cylinders)
• Adjustable winding speed and the direction of rotations (forward or reverse) can be switched
• The system has a braked control in the winding process to avoid over coiling
• Equipped with a wireless remote control box

▼ Designed for the recoiling of coil and reel.
▼ User friendly control panel for easy operation.
▼ Two modes of operation : Manual / Automatic.
▼ Adjustable re-coiling speed (Max. speed, RPM).
▼ The direction of rotations (Forward or Reverse) can be switched.
▼ Equipped with a wireless remote control box.

▼ User friendly control panel for easy operation.
▼ Two modes of operation : Manual / Automatic.
▼ Adjustable re-coiling speed (Max. speed, RPM).
▼ The direction of rotations (Forward or Reverse) can be switched.
▼ Equipped with a wireless remote control box.

▼ Three models for the maximum wire rope diameter 26, 36, and 44mm.
▼ Easy operation : AFter tensioning the wire rope and the current is applied, red annealing occurs.  By slowly turning the hand wheel, a special designed device will twist and pull apart the wire rope at the same time to make sure the ends are twisted and tapered.
▼ Allows annealing and tapering different sizes of wire rope by adjusting the distance between the machine chucks.
▼ Unique design for grips to secure the wire rope properly.
▼ Optional Accessories : Suction device.

▼ Including 5 ton power free pay off turn table for placement of supply of wire rope.

▼ Driving device with a brake.
▼ Meter measuring device, accuracy +/-1%.
▼ Equipped with a powered hydraulic cutter.
▼ 3 meters stand for cutting wire rope. Longer stand upon request is available.
▼ Electronic control by PLC system with a touching screen to set the length and number to cut.
▼ Capacity from 5mm to 28mm.
▼ Custom-made wire rope measuring options are available.
** WIROP® reserves the right to change specifications.