Products
Flemish Eye Steel Sleeves
▼ Crystal inspection on carbon steel sample.
▼ Exact In-house forging, heat treatment, and sand blasting process.
▼ Test dynamic endurance on Flemish eye steel sleeves sample 75,000 times and record maximum breaking load. Strictly follow EN 13411-3 standard.
▼ Batch code on each steel sleeve for traceability.
▼ Sustained improvement on manufacturing sleeves. Galvanized and self colored sleeves are available.
Duplex Oval Steel Sleeves
▼ Non-tapered.
▼ For turn-back loop.
▼ Specially processed low carbon steel.
▼ Note : Duplex oval steel sleeves are recommended for using with 6x19 or 6x37, IPS or XIP (EIP), FC or IWRC wire rope.
Steel Swage Buttons
▼ Specially processed low carbon steel. Recommended use with 6x19, 6x25, 6x29, 6x37 IPS or XIP (EIP), FC or IWRC wire rope.
Stainless Steel One-piece Sleeves
▼ The quickest and simplest solution to form strong swaged turn-back eyes in wire rope.
Stainless Steel Two-piece Sleeves
▼ The quickest and simplest solution to form strong swaged turn-back eyes in wire rope.
Forged Open Swage Sockets
▼ Swage sockets are forged from special bar, quality carbon steel with its hardness controlled by spheroidized finest annealing.
▼ Sockets have an efficiency rating of 100% based on the catalog strength of wire rope if sockets are under properly application.
▼ Swage Sockets are recommended for use with 6x19, 6x37, IPS or EIP, EEIP, RRL, or IWRC wire rope.
▼ Destructive testing or Proof Load testing the terminations is recommended before using any swage sockets with any other type of lay or construction or grade of wire rope. All should be documented to prove the adequacy of assembly in accordance with ASME (ANSI) B30.9 standard.
Forged Closed Swage Sockets
▼ Swage sockets are forged from special bar, quality carbon steel with its hardness controlled by spheroidized finest annealing.
▼ Sockets have an efficiency rating of 100% based on the catalog strength of wire rope if sockets are under properly application.
▼ Swage Sockets are recommended for use with 6x19, 6x37, ISP or EIP, EEIP, RRL, or IWRC wire rope.
▼ Destructive testing or Proof Load testing the terminations is recommended before using any swage sockets with any other type of lay or construction or grade of wire rope. All should be documented to prove the adequacy of assembly in accordance with ASME (ANSI) B30.9 standard.
Standard Tension Type (Capacity 50MT~300MT)
▼ Tension type test bench is Wirop's most popular design. It is configured so that the load cell used in tension type and is placed between the crosshead and cylinder. This design is compact, very user accessible and uses the least components while ensuring the load cell measures force properly. Tension type test bench does not require foundation anchoring unless the overall length is over 30 meters.