Stainless (SUS 316) Swage Thread Stud Ends
| ART NO. | ROPE SIZE (mm) | Lv (mm) | Lt (mm) | L (mm) | D (mm) | dv (mm) | M (mm) |
| W908S-03 | 3 | 35 | 30 | 28 | 7 | 3.4 | 5 |
| W908S-04 | 4 | 45 | 30 | 37 | 9 | 4.4 | 6 |
| W908S-05 | 5 | 55 | 40 | 45 | 10 | 5.5 | 8 |
| W908S-06 | 6 | 63 | 50 | 54 | 13 | 6.8 | 12 |
| W908S-08 | 8 | 90 | 60 | 81 | 20 | 8.8 | 16 |
| W908S-10 | 10 | 90 | 60 | 81 | 20 | 10.6 | 20 |
| W908S-12 | 12 | 120 | 80 | 108 | 25 | 13 | 24 |
| W908S-14 | 14 | 150 | 100 | 134 | 32 | 15 | 24 |
| W908S-16 | 16 | 150 | 100 | 134 | 32 | 17.2 | 27 |
| W908S-18 | 18 | 170 | 140 | 155 | 38 | 19.3 | 30 |
| W908S-20 | 20 | 190 | 140 | 170 | 40 | 21.3 | 36 |
| W908S-22 | 22 | 212 | 150 | 189 | 44 | 23.4 | 39 |
| W908S-24 | 24 | 230 | 150 | 205 | 48 | 25.5 | 39 |
| W908S-26 | 26 | 244 | 160 | 215 | 50 | 27.6 | 42 |
| W908S-28 | 28 | 270 | 180 | 242 | 58 | 30 | 48 |
| W908S-30 | 30 | 285 | 180 | 255 | 63 | 32 | 52 |
| W908S-32 | 32 | 297 | 180 | 270 | 65 | 34 | 56 |
| W908S-34 | 34 | 325 | 200 | 295 | 72 | 36.1 | 60 |
| W908S-36 | 36 | 340 | 220 | 315 | 78 | 38.3 | 64 |
⚠ Recommend to use 6x19, 6x25, 6x29, 6x37 IPS or XIP (EIP), FC or IWRC wire rope. If using any other type of construction or grade of wire rope, break load testing upon termination is recommended to examine the correct and adequate swaging process.
⚠ In accordance with ANSI B30.9, all slings terminated with swage sockets shall be proof load tested*.
*Maximum Proof Load shall not exceed 50% of XXIP rope catalog breaking strength.
*Maximum Proof Load shall not exceed 50% of XXIP rope catalog breaking strength.