Wirop Industrial Co., Ltd. was establishedin 1979 and wasthe first company to manufacture the swaging machine in Taiwan. Wirop Industrial Co., Ltd. is located at Kaohsiung, also known for its harbor in southern Taiwan.
Ever since then, with every single solid step in developing innovative products and continuously integrating the quality, Wirop Industrial Co., Ltd. always aims to achieve the guiding principle"ZERO DEFECTS, STRIVING TO BE THE BEST".
The products coupled with the spirit of the guiding principle are established to the market. Today, Wirop Industrial Co., Ltd. with exceptional experiences in the industry, is proudly supplying its machines, related equipment, and accessories to more than one thousand clients in more than 80 countries.
OUR MAIN PRODUCTS▼ Hydraulic Swaging Machine : capacity 15 ton ~ 4000 ton and above.
▼ Horizontal Tension Testing Bench : capacity 25 ton ~ 3000 ton and above.
▼ Swage Dies.
▼ Hydraulic Wire Rope Cutting Machine, Annealing and Tapering Machine, Winding Machine, and Recoiling Machine. ▼ Auto-Measuring and Cutting Machine.
▼ EN13411-3 (DIN 3093) Aluminum Ferrules : size range from #1 to #S128.
▼ Flemish Eye Steel Sleeves : size range from #1/4" to #6".
▼ Container Seals.
▼ SEEE Pre-Tension System, Ground Anchor Stay Cable System (Tie Cables, Bridge Cables, and Structural Cables).
▼ WIROP® Research and Development team is equipped with a lab proudly certified by TAF (Taiwan Accreditation Foundation, conforms to ISO/IEC 17025).
▼ WIROP® has been recognized by the Lloyd's Register Quality Assurance, the certificate of Quality Management System. We adopt modern and efficient 3D simulation and FEM
analysis to minimize errors and produce a stable solution.
▼ Dedicating efforts to technical innovations for providing the needs of wire rope fabricators.
▼ Our lab has equipped with testing benches : (1) Dynamic Fatigue Vertical 100T Testing Machine.
▼ "Only the paranoid survive." Wirop Industrial Co., Ltd. has implemented extremely strict quality control into practice at every stage of manufacturing process. The quality control is approved by ISO 9001:2008.
▼ Detailed testing on products and equipment before dispatch and shipping. Insure product quality through every stage of the manufacturing process.
▼ Crystal inspection on Carbon Steel and Aluminum Sample.
▼ Strictly follow EN 13411-3 standard. Setting 15% ~ 30% of maximum load capacity and testing the dynamic endurance on sleeves and wire ropes 75,000 times. Record the maximum breaking load according to EN 13411-3 standard.
▼ Testing bridge cables and container seals according to customer's request.