Product

Steel sleeves
W9042

W9042

Stainless Steel Two - Piece Sleeves

▼ The quickest and simplest solution to form strong swaged turn-back eyes in wire rope.
Product Specification
L A B After swage
Before swage
Art No. Ferrule code
(inch)
Weight/pc
(lb)
Length
(inch)
Width
(inch)
Height
(inch)
Length
(inch)
DIA.
(inch)
W9042-013 1/2 0.20 1-1/16 15/16 1-3/8 1-1/8 1.01
W9042-014 9/16 0.31 1-1/4 1-3/16 1-11/16 1-7/16 1.27
W9042-016 5/8 0.30 1-1/16 1-13/16 1-13/16 1-3/16 1.27
W9042-019 3/4 0.50 1-3/16 1-3/8 2-1/8 1-7/16 1.53
W9042-022 7/8 0.70 1-3/8 1-3/4 2-1/2 1-5/8 1.76
W9042-025 1 1.00 1-9/16 1-13/16 2-3/4 1-13/16 2.04
W9042-028 1-1/8 1.50 1-7/8 2 3-3/16 2-1/8 2.26
W9042-032 1-1/4 2.00 2-1/8 2-3/8 3-3/8 2-1/2 2.51
W9042-035 1-3/8 2.00 2-1/8 2-5/16 3-9/16 2-1/2 2.51
W9042-038 1-1/2 2.00 2-1/4 2-1/2 3-7/8 2-5/8 2.70
W9042-042 1-5/8 3.00 2-3/8 2-13/16 4-5/16 2-3/4 3.08
W9042-045 1-3/4 3.30 2-1/2 2-13/16 4-7/16 2-7/8 3.08
W9042-050 2 4.30 2-7/8 3-3/16 5 3-1/4 3.52
W9042-057 2-1/4 6.50 3-1/8 3-3/4 5-11/16 3-5/8 4.02
W9042-064 2-1/2 7.50 3-1/8 4 6-3/8 3-5/8 4.39
https://www.wirop.com.tw/imgs/warm.jpg Recommend to use 6x19, 6x25, 6x29, 6x37 IPS or XIP (EIP), FC or IWRC wire rope. If using any other type of construction or grade of wire rope, break load testing upon termination is recommended to examine the correct and adequate swaging process. 
https://www.wirop.com.tw/imgs/warm.jpg Swaging is finished in one step. Turn the sleeve 90 degrees and swage again is NOT recommended. 
Loading...