Product

Steel sleeves

Product Name : Duplex Oval Steel Sleeves

Item No. : W903

▼ Non-tapered.

▼ For turn-back loop.

▼ Specially processed low carbon steel.

▼ Note : Duplex oval steel sleeves are recommended for using with 6x19 or 6x37, IPS or XIP (EIP), FC or IWRC wire rope.
Product Specification
Art No. Rope size
(inch)
N.W.
Per 100pcs
(lb)
A
(inch)
B
(inch)
C
(inch)
D
(inch)
Max. O.D.
after swage
(inch)
W903-008 5/16 17 1.25 1.08 0.81 0.19 0.77
W903-010 3/8 13 1.25 1.12 0.81 0.14 0.77
W903-011 7/16 31 1.63 1.41 1.02 0.19 1.03
W903-013 1/2 27 1.63 1.44 1.02 0.16 1.03
W903-014 9/16 63 2.25 1.72 1.23 0.23 1.29
W903-016 5/8 54 2.25 1.84 1.28 0.20 1.29
W903-019 3/4 90 2.63 2.16 1.52 0.23 1.55
W903-022 7/8 126 2.88 2.50 1.75 0.27 1.80
W903-025 1 187 3.06 2.84 2.00 0.33 2.05
W903-032 1-1/4 384 4.06 3.50 2.50 0.38 2.56
http://www.wirop.com.tw/imgs/warm.jpg Recommend to use 6x19, 6x25, 6x29, 6x37 IPS or XIP (EIP), FC or IWRC wire rope. If using any other type of construction or grade of wire rope, break load testing upon termination is recommended to examine the correct and adequate swaging process.
http://www.wirop.com.tw/imgs/warm.jpg Swaging is finished in one step. Turn the sleeve 90 degrees and swage again is NOT recommended.